Hot Products

Company event

Al Mg Mn Alloy Sheet Is Corrosion Resistant, Easy To Bend And Easy To Weld
Nov 27, 2017


The superiority of the Al Mg Mn alloy retaining plate: aluminum material in the construction industry are widely used as wall and roof. Choose aluminium as a building material because it is economical and practical and has aesthetic value and decision. The airport, high-speed rail station, sports venues and other buildings are residential, only the use of aluminum to emergent building personality.

1. light weight: that is, the weight of the lower structure is lighter, and the prefabricated parts can be placed in a higher place. Without the use of large lifting equipment, the site can easily complete the lifting work

2. corrosion resistance: aluminum material itself has a strong corrosion resistance, its pre treatment, this feature is more prominent, so even in extreme conditions, the long-term use of forming thin aluminum sheet, it does not cost expensive to maintain it

3. durable: aluminum material has incredible strength, it can be used to build light but exceptionally stable structure

4. plasticity: aluminum material has good flexibility and plasticity, and unlimited design potential. It can be dealt with a variety of, such as: shaping, welding, riveting and cutting into dynamic 3-D geometry, etc.

5., simple lap: in addition to the use of the construction industry in the most commonly used connection method, but also can be used, such as: welding, riveting, fixed and direct fixed connection and other methods. These methods are simple and easy, can quickly and safely complete the connection of construction parts

6. recyclable: the aluminum roof and wall panel can be recycled with only one process, and the recycling process can save 95% of energy compared to the primary production process

7.: outstanding aesthetic value can be a variety of surface polishing and coloring treatment, for example: the plating or coating, can meet the aesthetic architects height requirement, can prolong the service life and the potential of aluminum material.

The characteristics of two aluminium alloy with standing seam system:

1, no connection port, no screw hole, the appearance of the building intact

2 can be made into inner arc and outer arc

3, you can choose different materials and colors

4. Integral structure waterproof and drainage function

5; can be used as small as 1.5 degrees slope roof

6; wind resistance (with excellent master), especially in typhoon and storm areas

7. It can eliminate the pressure caused by thermal expansion and contraction

8, simple and fast machine winding, convenient construction, economy

  • facebook