Forged aluminum disc
aluminum alloy forging
Aluminum wafers are widely used in electronics, daily chemistry, medicine, culture and education and auto parts. Electrical, thermal insulation, mechanical manufacturing, automotive, aerospace, military, mold, construction, printing and other industries. For example, kitchen utensils, such as non stick pots, pressure cookers, and hardware products such as lampshade, water heater shell and stretching tank, are the most widely used products of deep processed aluminum alloy sheet and strip.
1, cutting blanking material (cut into square) 2, blanking (blanking into the wafer you want)
If it is the volume, then add an open book to the front.
Automatic wafer dropping production line processing
The main components of the aluminum wafer open and close blanking production line are: loading trolley, uncoiler, leveling machine, feeder, swing unit, dedicated closed single point mechanical press, quick die changer, palletizing unit, scrap cutting, hydraulic system, electric control system, etc.
The technical features of the production line:
1, CNC automatic production line, the coil unwinding, until the entire volume of materials all completed blanking does not need manual contact with any quantity, does not need any adjustment, fundamentally eliminate the ordinary punch punching production safety and product quality problems.
2, the line can directly produce wafers with coil material, and do not need to do longitudinal and cross cut treatment of the coiled material, so as to reduce the production process, reduce the cost of production, reduce the possibility of damaging the surface of the coiled material, and ensure that the wafers produced are oil-free and scratch free.
3, the line takes full advantage of the width of the coiling material, and adopts the high-precision servo motor drive system to control the distance between the wafer and the wafer to the material edge to minimize. It can fundamentally reduce the amount of waste and make the utilization rate of raw materials more than 80%.
4, the production speed can reach 40-55 pieces per minute, and the production efficiency is improved.
5. Due to the modular design of the mold, the conversion time can be reduced to less than 15 minutes when the size of the wafer is converted. The diameter range of the produced wafer ranges from 85 mm to 750 mm.
6, advanced open book system, six type leveling machine, high rigid mechanical press, automatic palletizing system, etc., ensure the high quality of the wafer.
Technical parameters of production line:
Coiling width (mm): 500-1250 800-1400 1000-1600
Coiling thickness (mm): 0.4-3.0, 1.0-6.0
Volume weight (kg): 8000 10000
Drop diameter (mm): 85-660, 85-750100-900
Number of blanking (SPM): 40-55
Press nominal pressure (kN): 1250160020002500
material grade:1, 3, 5, 6, 8.
The state is O, H and so on.
Welcome to Contact us!
Address:qianjin road,kunshan city,Jiangsu Province,China