Product name | 4032 Anodized Aluminum Round Bar |
Length | 0-6000mm or as requested |
Surface | cold drawn，Mill finish, polished, etc |
Diameter | 32mm |
Tolerance | +/- 0.03 |
Straight | 0.5mm per meter |
Standard | EN755-2-1997;EN573-3-2003;EN755-3-1995,etc |
Product Keywords | Anodized Aluminum Bar, 4032 Aluminum Bar |
Application | 4000 series aluminum rods are a high series of silicon content. Usually silicon content between 4.5-6.0%. Is a building materials, mechanical parts, forging materials, welding materials; low melting point, good corrosion resistance, product description: with heat, wear characteristics |
Chemical Composition | |||||||||||
Grade | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Zr | Al |
4032 | 11.0-13.5 | 1.0 | 0.5-1.3 | — | 0.8-1.3 | 0.1 | 0.5-1.3 | 0.25 | — | — | Balance |
Mechanical Properties | |||||
Grade | Temper | Diameter(mm) | Tensile Strength(Mpa) | Yield strength(Mpa) | Elongation(%) |
4032 | T1 | 100.00-200.00 | ≥360 | ≥290 | ≥2.5 |
