5000 series aluminum rod 8mm
 | Product Description of aluminum rod |
1.Item: aluminum rod
2.Material Grade:5083,5052,etc
3.Finish condition:O,H112,T6,etc
4.Diameter:ø8mm
5.Length:1-6m or as customer's request
6.Surface Treatment:mill-finished,polished,anodized,brushing,sand blasting,powder coating,etc
7.Moq:500kg
8.Accuracy class:A
9.Chemical Composition:Si0.25%,Fe0.40%,Cu0.10%,Mn0.10%,Mg2.2-2.8%,Cr0.15-0.35%,Zn0.10%,other0.15%,Al balance
10.Mechanical Propety:tensile strength>170Mpa,yield strength>70Mpa,elongation>17%
11.Package:standard package/wooden case/pallet/or as custmer's request.
| Product Pictures of 5000 series aluminum rod |
|
|
| Properties |
1）Plasticity and high corrosion resistance,
2）heat treatment can not be strengthened, the plasticity is still good in the semi-cold hardening
3）low plasticity when cold work hardening, good corrosion resistance,
4）good weldability, poor machinability, can be polished.
Application:
5052 Aluminum Rod Uses Mainly used for demanding high plasticity and good weldability, low-load parts that work in liquid or gaseous medium, such as mailboxes, gasoline or lube conduit, a variety of liquid containers and other small deep-drawn Load parts: Wire is used to make rivets are also commonly used in transportation vehicles, ship's sheet metal parts, instruments, street lamp bracket and rivets, metal products, electrical housings, etc.
| If you are interested in our products, please offer these information when sending inquiry: |
diameter
length
weight
package detailed request
total quantity
application
any special requirements...
| Contact us |
Email:gugesouthwest@ksxinan.com
Tel:0086051255105768
Official web:www.southwest-aluminum.com
Alibaba web:www.ksxinan.en.alibaba.com
